 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MBR7030WT SWITCHMODETM Power Rectifier The SWITCHMODE power rectifier employs the use of the Schottky Barrier principle with a Platinum barrier metal. This state-of-the-art device has the following features: * Dual Diode Construction - Terminals 1 and 3 May Be Connected for * * * * Parallel Operation at Full Rating 30 Volt Blocking Voltage Low Forward Voltage Drop Guardring for Stress Protection and High dv/dt Capability 150C Operating Junction Temperature http://onsemi.com SCHOTTKY BARRIER RECTIFIER 70 AMPERES 30 VOLTS 1 2, 4 3 Mechanical Characteristics * Case: Epoxy, Molded. Epoxy Meets UL 94 V-0 @ 0.125" * Weight: 4.3 grams (approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal * * * * Leads are Readily Solderable Lead Temperature for Soldering Purposes: 260C Max. for 10 Seconds Shipped 30 Units Per Plastic Tube Marking: MBR7030WT ESD Ratings: Machine Model, B (< 400 V) Human Body Model, 3B (> 8000 V) 1 2 3 TO-247AC CASE 340L STYLE 2 MAXIMUM RATINGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (Rated VR, TC = 100C) Per Leg Per Device Peak Repetitive Forward Current, (Rated VR, Square Wave, 20 kHz, TC = 100C) Non-Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) Peak Repetitive Reverse Current (2.0 ms, 1.0 kHz) Storage Temperature Range Operating Junction Temperature Voltage Rate of Change (Rated VR) Symbol VRRM VRWM VR IF(AV) 35 70 IFRM 70 A Max 30 Unit V MARKING DIAGRAM A MBR7030WT 500 A IFSM IRRM Tstg TJ dv/dt 2.0 -55 to +150 -55 to +150 10,000 A C C V/ms MBR7030WT = Device Code ORDERING INFORMATION Device MBR7030WT Package TO-247 Shipping 30 Units/Rail Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. (c) Semiconductor Components Industries, LLC, 2005 1 April, 2005 - Rev. 0 Publication Order Number: MBR7030WT/D MBR7030WT THERMAL CHARACTERISTICS (Per Diode) Rating Thermal Resistance - Junction to Case Symbol RJC Max 0.55 Unit C/W ELECTRICAL CHARACTERISTICS (Per Diode) Instantaneous Forward Voltage (Note 1.) @ IF = 35 Amps, TC = 25C @ IF = 70 Amps, TC = 25C @ IF = 35 Amps, TC = 100C Instantaneous Reverse Current (Note 1.) @ Rated DC Voltage, TC = 25C @ Rated DC Voltage, TC = 100C 1. Pulse Test: Pulse Width = 300 s, Duty Cycle < 2.0% VF 0.55 0.72 0.52 IR 5.0 250 mA Volts TYPICAL CHARACTERISTICS IF, INSTANTANEOUS FORWARD CURRENT (A) 100 IR, REVERSE CURRENT (mA) 1000 100 10 1 0.1 0.01 TJ = -55C 0.001 0.0001 0.7 0.8 0 5 10 15 20 25 30 VR, REVERSE VOLTAGE (VOLTS) TJ = 150C TJ = 100C TJ = 25C TJ = 150C 10 TJ = 100C 1 TJ = 25C 0.1 TJ = -55C 0 0.1 0.2 0.3 0.4 0.5 0.6 VF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS) Figure 1. Typical Forward Voltage Figure 2. Typical Reverse Current http://onsemi.com 2 MBR7030WT TYPICAL CHARACTERISTICS IF(AV), AVERAGE FORWARD CURRENT (A) 80 70 60 50 40 30 20 10 0 100 110 120 130 140 150 160 SQUARE WAVE DC PF(AV), AVERAGE POWER DISSIPATION (WATTS) 45 40 35 30 25 20 DC 15 10 5 0 0 10 20 30 40 50 60 SQUARE WAVE TC, CASE TEMPERATURE (C) IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 3. Current Derating (Case) Figure 4. Forward Power Dissipation (Per Leg) 10000 9000 C, CAPACITANCE (pF) 8000 7000 6000 5000 4000 3000 2000 1000 0 0 5 10 15 20 25 VR, REVERSE VOLTAGE (VOLTS) 30 Figure 5. Typical Capacitance http://onsemi.com 3 MBR7030WT PACKAGE DIMENSIONS TO-247 PSI PLASTIC CASE 340L-02 ISSUE D -T- C -B- U N A 1 2 3 E L 4 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. MILLIMETERS MIN MAX 20.32 21.08 15.75 16.26 4.70 5.30 1.00 1.40 2.20 2.60 1.65 2.13 5.45 BSC 1.50 2.49 0.40 0.80 20.06 20.83 5.40 6.20 4.32 5.49 --- 4.50 3.55 3.65 6.15 BSC 2.87 3.12 ANODE CATHODE (S) ANODE 2 CATHODES (S) INCHES MIN MAX 0.800 8.30 0.620 0.640 0.185 0.209 0.040 0.055 0.087 0.102 0.065 0.084 0.215 BSC 0.059 0.098 0.016 0.031 0.790 0.820 0.212 0.244 0.170 0.216 --- 0.177 0.140 0.144 0.242 BSC 0.113 0.123 -Q- 0.63 (0.025) P -Y- M TB M K W F 2 PL G D 3 PL 0.25 (0.010) M J H YQ DIM A B C D E F G H J K L N P Q U W S STYLE 2: PIN 1. 2. 3. 4. SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. http://onsemi.com 4 MBR7030WT/D |
Price & Availability of MBR7030WT
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |